180 Setup: Item SettingsThis function determines unit mode after a cue-up operation.• XX indicates factory default settings.This menu sets the time code.• XX indicates factory default settings.EDITItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.315 AFTER CUE-UP000000010002STOPSTILLSTILL2Selects unit mode after cue-up operation.0: STOP mode1: Still picture (SHTL +0.0) mode2: Still picture (VAR +0.0) modeTIME CODEItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.500 VITC BLANK00000001BLANKTHRU Specifies whether or not a VITC signal will be output at the positions selected in setupmenu No. 501 (VITC POS-1) and No. 502 (VITC POS-2) during playback.0: VITC signals are not output.1: VITC signals are output.NOTE:• This setting is available only during analog composite output and SD SDI output.• In EE mode, the input signal is output with the VITC signal.501 VITC POS-1When set to 59.94 Hz,29.97 Hz, 23.98 Hz,24 Hz, 59-23 Hz,60-24 HzSpecifies the position where the VITC signal will be inserted.NOTE:• You cannot select the same line as in setup menu No. 502 (VITC POS-2).• The VITC signal is not output when 23.98, 24, 59-23, 60-24, or 60-25 is selected insetup menu No.25 (SYSTEM FREQ).• You cannot select the same line as in setup menu No.692 (UMID POS).• This setting is available only during analog composite output and SD SDI output.• This setting does not return to the factory default even if you press the SEARCH buttonand RESET button simultaneously.0000|0006|001010L|16L|20LWhen set to 50 Hz,25 Hz, 60-25 Hz0000|0004|00157L|11L|22L59.94Hz 50Hz 29.97Hz 25Hz only
