Connections: Connecting This Unit to a Network 137ConnectionsClips on the FTP server that are no longer necessary can bedeleted in the same way as clips on P2 cards.➝Refer to “Deleting Clips” (page 64).◆ NOTE:• The FTP server may stop the connection if an FTP thumbnail displayis left open and it will not be possible to delete clips after this. Shouldthis happen, return to the FTP explorer screen, open the FTPthumbnail display and delete the clip.Use the steps below to view metadata of clips on the FTPserver. This function shows the same information in the sameway as the P2 card clip property.1 Move the cursor to the target clip in the FTPthumbnail screen.It allows you to check detailed clip information in thescreen.2 Press the MENU button.3 Use the cursor buttons to choose [PROPERTY] –[CLIP PROPERTY] and press the SET button.You can also use the PROP (SHIFT + TC PRESET) button.➝For details, refer to “Viewing and Revising ClipInformation” (page 66).◆ NOTE:• Metadata can be viewed but not revised.• The FTP server may stop the connection if an FTP thumbnaildisplay or FTP properties are left open. This will preventsubsequent thumbnail displays. Should this happen, return tothe FTP explorer screen and open the FTP thumbnail display orproperties again.Use the steps below to transfer clips on P2 cards or hard disksto an FTP server or write back clips from the FTP server to P2cards or hard disks.1 Open the thumbnail screen to select a clip to transfer(turning its frame blue).2 Press the MENU button.3 Use the cursor buttons to choose [OPERATION] –[COPY] – [FTP] and press the SET button.4 The server screen appears.Use the cursor buttons when the selected server folderappears to select the folder the file will be transferred to.◆ NOTE:• Folder names using multi-byte characters are not correctlydisplayed.• Pressing the EDIT MODE button will show the new folder addedto the list of current folders. (regardless of cursor location).Numeric characters indicating the date and time areautomatically entered for the name of the new folder. Use the fullkeyboard to change it as required.Note that some characters are not allowed in some FTP servers.Folders with the same name as an existing folder cannot becreated.Deleting Clips on the FTP ServerViewing FTP Server Clip InformationTransferring ClipsTransferring clips to the FTP server (exportcopy)
