Editing: Creating Playlists 101EditingEvents can be cut (divided) at the recorder playback location(indicated by the yellow bar on the timeline).1 Switch to recorder operation.Press the PLAYER button to switch to recorder operation.2 Select the track of the event to be cut.Use the VIDEO/A1/A2/A3 (SHIFT + A1)/A4 (SHIFT + A2)buttons to select the track. The names of selected tracksare indicated in yellow on the left side of the timeline.3 Move the playback location to the location of the cut.4 Press the STOP button, then press the MENUbutton.5 Use the cursor buttons to choose [OPERATION] –[CUT SEQUENCE] and press the SET button.This operation cuts the target events.◆ NOTE:• This operation cannot be performed on an event that cannot beplayed back (red event).• Editing is performed in multiples of four frames in the 24PNplaylist format.Selected events can be moved. V, A1 to A4 events whose INand OUT points are aligned on the timeline can be moved.The destination is also limited to events at V and A1 to A4cursor location with IN points.1 Switch to recorder operation.Press the PLAYER button to switch to recorder operation.2 Select the events to move.Use the cursor buttons to move the cursor to the event tobe moved and press the SET button to select it.◆ NOTE:• Select the events of all tracks (VIDEO, A1, A2, A3 and A4).• Holding down the SET button for 1 second or longer will selectall events with the same length as the event at the cursorlocation.3 Move the events to the destination.Use the cursor buttons to move the cursor to the locationthe event is to be moved to. (The event moved using thecursors is inserted before this point.)4 Press the STOP button, then press the MENUbutton.5 Use the cursor buttons to choose [OPERATION] –[MOVE EVENTS] and press the SET button.This operation moves the selected events.◆ NOTE:• This operation moves the event to the location of the cut. It is notpossible to select any location, nor is overwrite editing available.Insertion is possible only when the IN points on the timeline arelined up.• Even if the selected events do not line up, they can be movedas long as the IN and OUT points of the overall events do.Cutting events1224 43,5Moving events42,3,514
