Chapter 4 Operation — Menu settings- 81 -[UB MODE]Selects the user bits mode. User bits information is recorded in the clip.(Factory setting: [USER])[REC COUNTER]Sets operation of the counter for recording.(Factory setting: [TOTAL])[TIME STAMP]Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.(Factory setting: [OFF])[NETWORK] menuSets the setting regarding the network function.[DEVICE SEL]Select the device that connects external equipment (computer, etc.) to the unit.The unit may restart when the setting is changed.* Available for setting when using .(Factory setting: [OFF])[NETWORK FUNC]Selects the network function of the unit.* Available for setting when using .(Factory setting: [OFF])@ NOTE0 (For the )When [NDI|HX] is selected, recording, thumbnail display, and control with the IP remote are not possible.[FRAME RATE] Selects the image information (such as frame rate) of the camera.[USER] Selects the user bits set in [UB PRESET].[TIME] Selects the local time. (hh, mm, ss)[DATE] Selects the local date and time. (YY, MM, DD, hh)[TC] Records the time code value as user bits.[CLIP NAME] Records the value that CAM INDEX (one character) and CARD COUNT (3-digit number) both converted to ASCII charactercode.Only enabled when the [SYSTEM] menu → [FILE FORMAT] → [MOV] or [MP4] is set.[TOTAL] The count continues cumulatively until either you press the USER button assigned to [RESET] or touch the USER button icon.[CLIP] Clears the counter value at the start of recording and counts the time for each recording.[OFF] Does not superimpose the date and time.[DATE] Superimposes only the date.[TIME] Superimposes only the time.[DATE&TIME] Superimposes the date and time.[USB-LAN]* Connects via a wired LAN.[WLAN] Connects via a wireless LAN.[OFF] Does not connect.[STREAMING] Enables the streaming function.[NDI|HX]* Enables the NDI|HX function.[OFF] Does not use the network function.CX10CX10CX10
