Panasonic AG-CX350 Manual

Also see for AG-CX10: Operating instructions Operating instructions Operating instructions Basic operating instructions

SKAARHOJ DEVICE CORESDevice: Panasonic AG-CX350IntroductionThe Device Core “Panasonic CX350” is used for controlling the AG-CX350 and AG-CX10 cameras. Thegoal of this manual is to help configuring a SKAARHOJ interface to control features available in the DeviceCore at this present time.Multicam ControlPlease notice with the release of UniSketch v2.4.16 Multicam Control have been enabled. Prior to v2.4.16only a single camera could be controlled from the Device Core. With the update up to 4 cameras can becontrolled from a single Device Core. Please see information in the section “Multicam Control”Setting up CameraIn order to control the camera it must be connected to the same network as your SKAARHOJ Controller..All communication between a SKAARHOJ interface and the camera is done via IP. The implementationhave been done on version 1.01-00.0.001