| 
Chapter 5 Shooting — Adjustable settings when shooting- 111 -Setting the shutter speed1 Switch to manual mode with the switch. (l 103)2 Press the button to switch to manual shutter mode.The shutter speed display is highlighted in orange.3 Turn the multidial to select the shutter speed.4 Press the multidial.The setting changes to the value displayed and exits.Press the button to exit without changing the setting.∫ Adjusting the shutter speedShutter speed changes depending on the frame rate of the [REC FORMAT]. (l 104)≥ The shutter speed is faster the closer the setting is to 1/8000.@ NOTE0 Brightly shining objects and highly reflective objects may emit light bands into the surroundings.0 The changing of the screen may not look smooth in normal playback.0 When extremely bright subjects are recorded or when recording is performed inside under lights, there may be changes in the color hue and brightnessof the screen, with horizontal bands appearing on the screen. Do the following if this occurs:j Switch to auto shutter mode.j Adjust the shutter speed to 1/50, 1/60, or 1/100.0 When auto iris mode or auto gain mode is enabled, the brightness of the screen may not change even when you adjust the shutter speed. (l 107, 108)0 When the shutter speed has been set to slow shutter, it may not be possible for the camera to keep up with changes in the images. If this occurs, set theiris, focus, and white balance manually.Area mode functionTouch the subject to apply various effects tailored to the subject that is touched.≥ Area auto focus functionAdjusts the focus automatically tailored to the subject that is touched.≥ Area auto iris level functionAdjusts the iris automatically tailored to the subject that is touched.≥ Area brightness displayDisplays the luminance level of the subject that is touched.Operation function settingsSets the operation to be assigned to the area mode function from the [CAMERA] menu.1 Select the desired function in the [CAMERA] menu → [SW MODE] → [AREA MODE].≥ [INHIBIT]: Does not assign a function.≥ [FOCUS]: Sets the area auto focus function≥ [IRIS]: Area auto iris function≥ [Y GET]: Area brightness display≥ [FOCUS/IRIS]: Simultaneous operation of the area auto focus function and area auto iris function≥ [FOCUS/Y GET]: Simultaneous operation of the area auto focus function and area brightness displayA Shutter speed≥ [A.SHTR] is displayed when the auto shutter mode is on.B SHUTTERFrame rates Shutter speed59.94p/59.94i 1/8!#1/15!#1/30!#1/60!#...1/800029.97p 1/8!#1/15!#1/30!#1/50!#...1/800050.00p/50.00i/25.00p 1/6!#1/12!#1/25!#1/50!#...1/800023.98p 1/6!#1/12!#1/24!#1/48!#...1/8000SHUTTER1/60 |
