204 OEM4 Family Installation and Operation User Manual Rev 12Appendix K Specifications ArchiveK.5.2 CablesK.5.2.1 Automobile Power Adapter Cable (NovAtel part number 01016331)The power cable supplied, see Figure 72, allows you to connect a DC power source of your choice. Itis conveniently equipped with an automobile power adapter for supplying +12 VDC while operatingfrom an automobile. The output from the power adapter utilizes a 4-pin LEMO connector (LEMO partnumber: FGJ.0B.304.CNLD52Z). For field replacement of the LEMO connector, please see AppendixJ, Page 181 for a list of the manufacturers' part numbers.The input power cable is fuse protected and has been charged from 4 amp to 2.5 amp. The automobilepower adapter is equipped with a 3 Amp slow-blow fuse, located inside the adapter tip. The tip can beunscrewed to allow replacement of the fuse, if necessary. To ensure optimum performance whenreplacing the fuse first spring load the fuse. The adapter has an LED on its side panel to indicate thatpower is connected.Reference Description Reference Description1 Brown 5 Ground2 Orange 6 +10 to +36 VDC3 Red 7 +10 to +36 VDC4 Black 8 Ground9 Red marker at top 12 Universal tip10 Automobile adapter 13 3 amp slow-blow fuse11 SpringFigure 72: ProPak-4E Power Cable-+-+14321 (-) 4 (-)3 (+)2 (+)9567810121113
