106PARAMETERS：Items DescriptionHash Code ContributorsSource MACAddressThe Source MAC address can be used tocalculate the destination port for the frame.Check to enable the use of the Source MACaddress, or uncheck to disable. By default,Source MAC address is enabled.DestinationMAC AddressThe Destination MAC Address can be used tocalculate the destination port for the frame.Check to enable the use of the DestinationMAC Address, or uncheck to disable. Bydefault, Destination MAC Address is disabled.IP Address The IP Address can be used to calculate thedestination port for the frame. Check toenable the use of the IP Address, or uncheckto disable. By default, IP Address is enabled.TCP/IP PortNumberThe TCP/IP port number can be used tocalculate the destination port for the frame.Check to enable the use of the TCP/IP PortNumber, or uncheck to disable. By default,TCP/UDP Port Number is enabled.Aggregation Group ConfigurationGroup ID Indicates the group ID for the settingscontained in the same row. Group ID“Normal” indicates there is no aggregation.Only one group ID is valid per port.Port Members Each switch port is listed for each group ID.Select a radio button to include a port in anaggregation, or clear the radio button toremove the port from the aggregation. Bydefault, no ports belong to any aggregationgroup. Only full duplex ports can join anaggregation and ports must be in the samespeed in each group.
