8-6 TroubleshootingErrorcode Error message Recommended Action02D1 System Memory exceeds the CPU's cachinglimit.02F4 EISA CMOS not write able.02F5 DMA Test Failed.02F6 Software NMI Failed.02F7 Fail-safe Timer NMI Failed.Contact your service representative.0B22 Processors are installed out of order. Request the maintenance to replace theCPU.0B28 Unsupported Processor detected onProcessor 1.0B29 Unsupported Processor detected onProcessor 2.Make sure that the server supports theCPU. If you are not sure, contact yourservice representative to request themaintenance.0B30 FAN1 Alarm occurred.0B31 FAN2 Alarm occurred.0B32 FAN3 Alarm occurred.0B33 FAN4 Alarm occurred.0B34 FAN5 Alarm occurred.0B35 FAN6 Alarm occurred.0B36 FAN7 Alarm occurred.0B37 FAN8 Alarm occurred.0B38 FAN9 Alarm occurred.0B39 FAN10 Alarm occurred.0B3A FAN11 Alarm occurred.0B3B FAN12 Alarm occurred.0B3C FAN13 Alarm occurred.0B3D FAN14 Alarm occurred.0B3E FAN15 Alarm occurred.Clean the internal cooling fans.Contact your service representative toreplace the fan.0B42 Resource Conflict0B43 Warning: IRQ not configured0B45 System configuration Data Write ErrorContact your service representative.0B50 Processor #1 with error taken off line.0B51 Processor #2 with error taken off line.0B5F Forced to use Processor with errorBecause an error is detected in CPU, thesystem is forcibly started. Contact yourservice representative.0B60 DIMM group #1 has been disabled0B61 DIMM group #2 has been disabled0B62 DIMM group #3 has been disabled0B63 DIMM group #4 has been disabled0B64 DIMM group #5 has been disabled0B65 DIMM group #6 has been disabledContact your service representative.0B70 The error occurred during temperaturesensor reading.Contact your service representative.0B71 System Temperature out of the range. Contact your service representative toreplace the fan.0B74 The error occurred during voltage sensorreading.0B75 System voltage out of the range.Contact your service representative.
