Installing Windows Server 2003 x64 Editions D-17Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)Adapter Fault Tolerance (AFT) is a feature that creates a group containing more than one adapterand automatically converts the process of the working adapter to the other adapter in the groupwhen any trouble occurred on that adapter.Adaptive Load Balancing (ALB) is a feature that creates a group containing more than one adapterand enhance the through put by operating packet transmission from the server by all the adapters.This feature includes AFT feature.IMPORTANT: AFT/ALB setup must be operated after installing the drivers andrestarting the system. All the adapters specified as a group of Adapter Teaming must existon the same LAN. If they are connected to the separate switches,they will not work normally.If you want to utilize AFT/ALB feature, follow the procedure below to setup.1. The [Intel (R) PROSet] dialog box appears.* The procedure in the case of the standard start menuClick Start menu, point to [Control Panel], [administrative tools], and click[Computer Management] and then double click the [(Network Adapter Name)] in theNetwork Adapter list.* The procedure in the case of the classic start menu1. Click Start menu, point to [Settings] and click [Control Panel].2. Click [administrative tools].3. Click [Computer Management] and double click the [(Network Adapter Name)] inthe Network Adapter list.2. Select [Teaming] tab and then check on [Team with other adapters] and click [NewTeam...].The [New Team Wizard] dialog box appears and click [Next]* Specify a name for the team if it necessary.3. Select the adapters to include in team.4. Select "Adapter Fault Tolerance" or "Adaptive Load Balancing" and click [Next].5. Click [Finish].6. The setup will go back to [Intel (R) PROSet for Wired Connections] dialog box, so click[OK].7. Restart the system.
