Appendix ASpecificationsSATA Hard disk drive modelsNEC Express5800/120Rg-1N8100-Item1241F 1327F 1328F 1242F 1301F 1302F 1304FType Intel Xeon processorClock/Cache 1.60GHz/4MB2.0GHz/4MB2.33GHz/4MB3.0GHz/4MB1.60GHz/4MB2.0GHz/4MB3.0GHz/4MBStandard 1CPUMaximum 2Chipset Intel 5000P (1066/1333 MHz)Minimum 2GB (1GB×2)Maximum 48GB (The standard DIMM must be replaced.)Expansion unit 2 DIMMs (512MB/1GB/2GB/4GB)Expansion times 6 timesMemory module SDRAM DIMM (Low Profile DDR2-533Buffered Type)DDR2-667 FB-DIMM, withChipkill featureMemoryError check ECCGraphics (VRAM) VRAM: 16MBFloppy disk (option) 3.5-inch drive × 1 (USB)Hard disk (standard) NoneHard disk (maximum) 750GB (250GB × 3) 1500GB (500GB × 3)Auxiliary inputdeviceOptical disk drive DVD-ROM driveDVD: x8 speed max.CD: x24 speed max.CD-RW/DVD-ROM driveDVD: x8 speed max.CD: x24 speed max.Interface SATA2/300Slots 3RAID RoMB: RAID0/RAID1Option: RAID0/RAID1/RAID5Hard disk drivebayHot-swap Supported if the RAID system is configured.PCI EXPRESS (x8) 1 slot (low-profile)Additional slotPCI-X (64-bit/100 MHz) 1 slot (full-height)LAN interface 1000Base-T/100Base-TX/10Base-T (2 ports)100Base-TX/10Base-T (1 port for management port)Keyboard/mouse MINI DIN 6-pin connector (1 port)USB 4-pin (4 ports, 2 for front panel, 2 for rear panel)Serial DB-9 (2 ports, 1 for front panel, 1 for rear panel)Network RJ-45 (2 ports)Display MINI D-sub 15-pin (1 port)ExternalinterfaceSCSI OptionPower supply 1 (no redundancy)Fan 8 + 7 redundant fansCabinet design Rack-mount type (1U)External dimensions 425 (width) × 43 (height) × 718* (depth) mmWeight (Max.) 16 kg (19 kg)Power supply 100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 HzTemperature 10 to 35°C (operating), -10 to 55°C (non-operating, storage)Environmentalrequirements Humidity 20 to 80% RH (no condensation)Others NEC EXPRESSBUILDER supported, NEC ESMPRO provided in thestandard configuration* Excluding the front bezel.
