NEC N8100- 1241F User Manual

Also see for Express5800/120Rg-1: Datasheet User guide

Contents

NEC N8100- 1241F User Manual Manual pdf 344 page image

E-14 Installing Windows Server 2003Network DriverSpecify the details of network driver.One standard network driver that is mounted will be installed automatically, but the link speed andDuplex mode need to be specified manually.[When PROSet is not installed]1. The [Local Area Connection Properties] dialog box appears.* The procedure in the case of the standard start menu1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click[Local Area Connection].* The procedure in the case of the classic start menu1. Click Start menu, Click [Settings] and Click [Network Connections].The [Network Connections] dialog box appears.2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.2. Click [Configure].The property dialog box for network adapter appears.3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the valuespecified for HUB.4. Click [OK] on the property dialog box for network adapter.[When PROSet is installed]1. The [Intel(R) PROSet] dialog box appears.* The procedure in the case of the standard start menuClick Start menu, point to [Control Panel], [Administrative Tools], and click[Computer Management] and then double click the [(Network Adapter Name)] in theNetwork Adapter list.* The procedure in the case of the classic start menu1. Click Start menu, point to [Settings] and click [Control Panel].2. Click [administrative tools].3. Click [Computer Management] and double click the [(Network Adapter Name)] inthe Network Adapter list.2. Click the [Link] and specify the [Speed and Duplex] value the same as the value specifiedfor HUB.3. Click [Apply] and click [OK].