NEC MultiSync VT440 User Manual

Also see for MultiSync VT440: Installation data Specifications Service manual User manual

NEC MultiSync VT440 User Manual Manual pdf 24 page image

E–23R LRGBINPUTOUTPUTAUDIOININOUTOUTPC-CONTROL S-VIDEO VIDEOS-VIDEOVIDEOVIDEOR LUse common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.To make these connections, simply:1. Turn off the power to the projector and VCR, laser disc player or document camera.2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to theVideo input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audioequipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereosound.3. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner’s manual for more information about your equipment’s video output requirements.VCR/ Laser disc playerConnecting Your VCR or Laser Disc PlayerS-video cable(not supplied)Audio cable(not supplied)Audio equipment Document cameraVideo cable (not supplied)RedWhiteRedWhite