4-5Configuration ExamplesThe following describes examples of configuration required to use software-link features or forsystem operations.Link with Management SoftwareTo use the management PC with "NEC MWA" installed for remote operations Remote operation via LANSelect [Advanced] → [Advanced] → [RomPilot Support] → [Enabled]. Remote operation via direct connection using cross cableSelect [System Hardware] → [Console Redirection] → [Console Connection] → [Direct]. Remote operation via WANSelect [System Hardware] → [Console Redirection] → [Console Connection] → [ViaModem].UPSTo link power supply with the UPS To power on the server when power is supplied from the UPSSelect [System Hardware] → [AC-LINK] → [Power On]. To keep the server off-powered even when power is supplied from the UPS if the POWERswitch was used to power offSelect [System Hardware] → [AC-LINK] → [Last State]. To keep the server off-powered even when power is supplied from the UPSSelect [System Hardware] → [AC-LINK] → [StayOff].KeyboardTo set NumLock and key repeatSelect [Advanced] → [Keyboard Features] and set each item.
