2. Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending onwhere you want to connect the new keyboard or mouse, see “Locating connectors, controls, andindicators on the front of your computer” on page 83 or “Locating connectors on the rear of yourcomputer” on page 84.Figure210. Connecting the USB keyboard or mouseCompleting the parts replacementAfter completing the installation or replacement of all parts, you need to reinstall the computer cover andreconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updatedinformation in the Setup Utility program. Refer to Chapter 6 “Using the Setup Utility program” on page 57.To reinstall the computer cover and reconnect cables to your computer, do the following:1. Ensure that all components have been reassembled correctly and that no tools or loose screws are leftinside your computer. See “Locating major FRUs and CRUs” on page 85 for the locations of variouscomponents in your computer.2. Before reinstalling the computer cover, ensure that the cables are routed correctly. Keep cables clear ofthe hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.Chapter 11. Replacing FRUs (machine types: 10AX and 10AY) 239
