Installing the front Wi-Fi antennaTo install the front Wi-Fi antenna, do the following:1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnectall power cords from electrical outlets and disconnect all cables that are connected to the computer.2. Remove the computer cover. See “Removing the computer cover” on page 136.3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 1364. Peel off the paper that protects the sticker on the front Wi-Fi antenna.Figure134. Peeling off the paper that protects the sticker5. Stick the front antenna to the front panel as shown. Then insert the front antenna cable through thehole in the front panel.Figure135. Installing the front WiFi antennaChapter 10. Replacing FRUs (machine types: 10B4, 10B5, 10B6, and 10B7) 183
