Keysight PNA-X Series Configuration Manual

Also see for N5221B: Security Features and Document of Volatility Installation notes

Contents

Keysight PNA-X Series Configuration Manual Manual pdf 26 page image

Page 26Find us at www.keysight.comOverview S93029B/A without Option 029 S93029B/A with Option 029Description Noise figure application using standard receiversonly, for all PNA/PNA-X modelsNoise figure application using standard or low-noisereceivers, for all PNA-X modelsRequired options Not recommended with PNA Options 200, 210, 400,410For N5241/42/49B, one of Options 21x, 22x, 41x or 42xFor N5244/45/47B, one of Options 22x or 42xIncludes low-noise receiver No Yes 1Includes filters for LO-harmonicrejectionNo Yes 1Includes source tuner bypass switch No YesUse standard receivers for noise figuremeasurements 2Yes YesVector noise calibration available usingECal as tunerYes YesVector noise calibration using built-intunerNo Yes, for N5244/45/47B 1Recommended ECal for vector noisecalibration 33.5 mm N4691D-M0F (N5221/22/41/42/49B) 3.5 mm N4691D-M0F (N5241/42/49B)2.4 mm N4693D-M0F (N5224/25/44/45B) Built-in for N5244/45/47B1.85 mm N4694D-M0F (N5227/47B)Included tuner accessories for m-f ECal 3.5 mm N5242-20169 cable, 85052-60013 m-fadapter (N5221/22/41/42/49B)2.4 mm N5245-20140 cable, 85056-60007 m-fadapter(N5224/25/44/45B)1.85 mm N5247-20142 cable, 85058-60115 m-fadapter (N5227/47B)3.5 mm N5242-20169 cable, 85052-60013 m-f adapter(N5241/42/49B)N/A for N5244/45B, due to built-in tuner1.85 mm N5247-20142 cable, 85058-60115 m-fadapter (N5247B, for use with external 67 GHz ECal)Recommended adapter for f-f ECaltuner (N4691D/93D/94D-F0F)3.5 mm 85052-60014 m-m adapter(N5221/22/41/42/49B)2.4 mm 85056-60005 m-m adapter(N5224/25/44/45B)1.85 mm 85058-60113 m-m adapter (N5227/47B)3.5 mm 85052-60014 m-m adapter (N5241/42/49B)N/A for N5244/45/47B, due to built-in tunerScalar noise calibration available Yes YesS-parameter, conversion gain/loss measurementsMax freq (GHz) 8.5/13.5/26.5/43.5/50/67 8.5/13.5/26.5/43.5/50/67NF measurements, amplifiersMax frequency, using low-noisereceivers (GHz)N/A 8.5/13.5/26.5/43.5/50Max frequency, using standardreceivers (GHz) 28.5/13.5/26.5/43.5/50/67 8.5/13.5/26.5/43.5/50Calibration accessories for low-noisereceiversN/A Cal kit or ECal, 346C or 346C-K01 noise source orpower meterCalibration accessories for standardreceiversCal kit or ECal, power meter Cal kit or ECal, power meterPNA Family Applications and Options (Continued)Noise figure measurement summary1. For N5247B, the low-noise receiver and tuner works up to 50 GHz only.2. External preamplifier and filter(s) required if DUT excess noise (gain plus noise figure) is < 30 dB up to20 GHz, < 40 dB up to 50 GHz, or < 45 dB up to 67 GHz.3. Only N4690 Series ECal modules are supported for use as an impedance tuner.