User manual Page 31www.keit.co.uk Using the system and software: DOC0535 (10 July 2019, 16:56)Back to Table of Contents5.3 The Spectrometer tabWhen you start the Keit Spectrometer Software (Keit Spec) you will see the Spectrometerscreen which provides information to help you set up the instrument and ensure that it isworking properly.After starting the software wait a few seconds for the spectrometer to connect and for theinternal electronics to activate and the emitter to warm up. Diagnostics information is shownin the panel at the right-hand side, and at the right-hand side of the tab bar.Figure 2: The Spectrometer tabA. Menu control buttonsNew Project:Create a new project (either Manual Sample Acquisition or Continuous Collection)
