English 5.906-565.0 Rev. 00 (12/12) 25 Mark the bearing shells (in the example: 1, 2, 3). Loosen 6 screws. Remove the bearing shells. Mark the piston rods (in the example: 1 dot, 2 dots,3 dots).1 Flange Loosen 4 screws. Pull the flange off the crankshaft casing.1 Cover2 Bearing cover Loosen 4 screws. Remove the lid.CautionRisk of damage for the subjacent ball bearing and thegasket seat in the crankshaft casing. Do not positionthe screwdriver to close to the edge of the cover. Drive the screwdriver into the cover and prise thecover open. Remove the safety ring from the shaft. Push all pistons completely towards the cylinderhead.7.16.3Dismantling the drive
