English 5.906-565.0 Rev. 00 (12/12) 15 Pull out both bearings. Remove the hood.NoteSee "Technical Details" for details of oil quantity andtype. Open the device hood. Unscrew oil drain plug. Drain the oil in a collection basin. Fix in the oil drain screw and tighten it.Torque 20...25 Nm. Turn the oil fill screw out. Fill in new oil slowly; air bubbles should go out.The oil level must be at the centre of the oil leveldisplay. Screw in oil filling screw. Close cover.7.2 Remove the appliance cover 7.3 Oil change