ENGLISHOPERATIONS21Enjoying surround soundsYou can enjoy multi-channel surroundplayback through the front, center, surroundspeakers.• Without connecting (and activating) centerspeaker and surround speakers, you cannotenjoy surround playback .MULTI: For multi-channel encoded sourcessuch as Dolby Digital*1 , DTS*2, and DVDAudio. (When activated, “MULTI” is shown onthe disc information screen.)Dolby Pro Logic II (Movie/Music): For 2channel sources except for MPEG 2-channeldiscs. (This can also be used for SD cardplayback. ☞ page 27)To turn on the surround...123• Surround Off: Deactivates surround.• Surround On: Activates surround = go tothe following steps.4SetupSurroundEqualizerSoundModeListSetupSurroundEqualizerModeListAutoDolby PLII MovieDolby PLII MusicAutoDolby PLII MovieDolby PLII MusicAutoDolby PLII MovieDolby PLII MusicSurround OffSurrond On• Auto: “MULTI” surround is activated whenmulti-channel digital signals are detected.• Dolby PLII Movie: Activates Dolby ProLogic II Movie.• Dolby PLII Music: Activates Dolby ProLogic II Music = go to the following step.5 Only when selecting “Dolby PLIIMusic”• Panorama: Select “Panorama On” to addwraparound sound effect.• CenterWidth: Adjust the center imageso it may be heard only from the centerspeaker, only form the left/right frontspeaker as a “phantom” center image, orvarious combination of these speakers. Asthe number increases, the “phantom” effectbecomes stronger (normally select “4”).On the remote controller:1• You cannot change the “Dolby PL II Music”settings using the remote controller.*1 Manufactured under license from Dolby Laboratories. Dolby,Pro Logic, MLP Lossless, and the double-D symbol aretrademarks of Dolby Laboratories.*2 “DTS” and “DTS Digital Surround” are registered trademarksof Digital Theater Systems, Inc.PanoramaCenterWidthRM-RK240SHIFTSURROUNDSURROUND