44EnglishOperating other devices using the remote controlOperate the remote control by pointing it at the TV..NOTE• When the remote control mode selector is slid to[TV], some buttons may not work.1 Slide the remote controlmode selector to [VCR/DBS].2 Press [VCR] or [DBS].3 Hold down [VCR/DBS F].• Hold down [VCR/DBS F] until you finishstep 5.4 Press [ENTER] and release.5 Press number buttons to enter themanufacturer code.Manufacturer codes for VCRsExamples:For a Hitachi VCR: Press [0], then [4].For a Mitsubishi VCR: Press [1], then [3].When the manufacturer of your VCR has 2 or morecodes, select the manufacturer codes in turn andfind the one that operates the VCR and the remotecontrol properly.Remotecontrol button Usage[TV F] Turns on/off the TV.[TV/VIDEO] Changes between the TV andvideo input.[TV CHANNEL+/ –] Changes channels.[TV VOL +/ –] Adjusts volume.Number but-tons (1-9, 0,100+)Slide theremote controlmode selectorto [TV] inadvance.Selects thechannels.[TV RETURN]Changesbetween thepreviouslyselected chan-nel and the cur-rent channel.Using the remote control for the TVoperationOperating a VCR/DBS usingthe remote controlManufacturer CodeJVC 01, 02, 03Emerson 11, 26Fisher 29Funai 10, 14, 15, 16Gold Star 12Hitachi 04Mitsubishi 13NEC 25Panasonic 07, 17Philips 09RCA 05, 06Samsung 24Sanyo 21, 22, 23Sharp 27, 28Shintom 30Sony 18, 19, 20Zenith 08Setting the manufacturer code(Continued on the next page)
