21Listening to radio broadcasts* For the number button usage, refer to “Using thenumber buttons” on page 17.■ CAUTION• Slide the remote control modeselector to [AUDIO].AM stations are spaced 9 kHz apart in some coun-tries and 10 kHz in other countries.■When the main unit is turned offTo select 9 kHz spacing, while holding down[VOLUME –] on the main unit, press F on themain unit to turn on the power. “AM 9 kHz STEP”appears in the display window.To select 10 kHz spacing, while holding down[VOLUME +] on the main unit, press F on themain unit to turn on the power. “AM 10 kHz STEP”appears in the display window.NOTE• When the spacing is switched, the preset radiostation memory is erased.1 Press [FM/AM] to select “FM” or“AM” in the display window.• Each time you press [FM/AM], the band tog-gles between “FM” and “AM”.• Repeatedly pressing [SOURCE] on themain unit can also select a radio broadcastas the source.Example: Display when an FM radio broadcastis receivedNumberbuttons*Setting the AM tuner spacingSelecting a radio stationStereo indicatorPreset number (Refer to page 22.)Frequency (M: MHz/k: kHz)Remote controlmode selectorListening to radio broadcasts
