JVC DD-3 Instructions Manual

Also see for CA-DD3: Instructions Instructions Instructions Instructions

Contents

42EnglishPlaying back sources from other devicesWhen you start analog playback of a portable digi-tal audio player connected to the [LINE IN 1] termi-nal while the main unit is off or another source isselected, the main unit automatically turns on andthe source changes to the connected portable digi-tal audio player. This function is called the quickportable link function (QP LINK).Press [QP LINK] repeatedly to select“QP ON” in the display window.• To deactivate QP LINK, select “QP OFF”.• You can set QP LINK when the main unit is bothon and off.■When “QP ON” is selected1 Connect a portable digital audioplayer to the [LINE IN 1] terminalusing an audio cable.2 Start playback on the portable dig-ital audio player.• If the main unit is off, the main unit automati-cally turns on.• The source from the portable digital audioplayer is automatically selected, “LINE 1” isdisplayed and sound is produced.NOTE*1 When “QP ON” is displayed, “:ACT” or “:NOACT” is also displayed to indicate the status ofQP LINK. (According to the status of the mainunit, “:ACT” and “:NO ACT” changes automati-cally.)- “QP ON :ACT” is displayed when QP LINKis activated and available.- “QP ON :NO ACT” is displayed when QPLINK is activated but unavailable.Pressing [QP LINK] once can be used to con-firm the status of QP LINK.If the sensitivity for the input audio signal is toohigh, QP LINK may be activated even when theportable digital audio player is not played back.At this time, you can select the lower sensitivity.Hold down [QP LINK].• Each time you hold down [QP LINK], the displaychanges in the display window as follows.- “QP: LEVEL1” for normal usage (the initial set-ting)- “QP: LEVEL2” for lower sensitivityQP LINKActivating QP LINK*1Using QP LINKMain unit (front view)Audio cable(not supplied)Output Portable digital audio player orother audio deviceSelecting the sensitivity for QP LINK