Menu
Husqvarna WR 250 2002 Owner's Manual
                                                                                                                                                                                                                                                                                                 | |
Contents
|
Applicazione FilettaturaApplication ThreadingApplication Filetate Nm Kgm Lb/ftVite fiss. superiore motoreScrew fixing engine upper side M10x1,25 26,5÷29,4 2,7÷3 19,5÷21,7Vis de fixation supérieure moteurVite fiss. cavallotto frizioneScrew fixing clutch connec tion M6x1 4,7÷5,1 0,48÷0,52 3,5÷3,8Vis de fixation crampillon embrayageVite fiss. cavallotto freno anterioreScrew fixing front brake connection M6x1 4,7÷5,1 0,48÷0,52 3,5÷3,8Vis de fixation crampillon frein avantVite fiss. tubazione freno ant. sulla pompa freno 18,1÷20,1 1,85÷2,05 13,4÷14,8Screw for fixing the front brake pipes on brake pump M10x1Vis de fixation tuyauterie frein avant sur la pompe frein 23,5÷25,5 2,4÷2,6 17,3÷18,8Vite fiss. pedale freno posterioreScrew fixing rear brake pedal M10x1,25 (*) 39÷44 4,0÷4,5 29÷32,5Vis de fixation pédale frein arrièreVite fiss. pompa freno posterioreScrew fixing rear brake pump M6x1 9,8÷10,8 1,0÷1,1 7,2÷8,0Vis de fixation pompe frein arrièreVite fiss. tubazione freno posterioreScrew fixing rear brake pipe M10x1 18,1÷20,1 1,85÷2,05 13,4÷14,8Vis de fixation tuyauterie frein arrièreVite fiss. serbatoio fluido frenoScrew fixing brake fluid tank M6x1 2,35÷2,55 0,24÷0,26 1,73÷1,88Vis de fixation reservoirs fluide des freinsInterruttore stop posteriore (WR)Rear light switch (WR) M10x1 13,8÷15,7 1,4÷1,6 10,1÷11,6Interrupteur feux de stop (WR)Vite fiss. camma regolazione pedale frenoScrew for fixing the brake pedal adjusting cam M6x1 12,2÷13,3 1,24÷1,36 9÷9,8Vis de fixation came de réglage pédale du freinVite fiss. steli forcellaScrew fixing forkrods M8x1,25 23,5÷25,5 2,4÷2,6 17,3÷18,8Vis de fixation tiges fourcheVite fiss. perno ruota anterioreScrew fixing front wheel axle M10x1,5 44÷55 5,0÷5,5 36,2÷39,8Vis de fixation pivot roue avantGhiera reg. cuscinetti sterzo (1° avvitamento)Ring nut for handlebar bearing adjustment (1st turn) M25x1 3,2÷3,6 0,33÷0,37 2,4÷2,7Collier de réglage paliers de direction (1ère vissage)Dado perno di sterzoNut for handlebar pin M24x1 79÷87 8,1÷8,9 58÷64Ecrou pivot de directionCOPPIE DI SERRAGGIO / TIGHTENING TORQUES / COUPLES DE SERRAGEWRCR(*): “LOCTITE 242”250IMP.12-250/360-2002 11-12-2001 11:45 Pagina 250 |
Related manuals for Husqvarna 2002 CR 250
Husqvarna WR 250/2006 Owner's Manual
Husqvarna 2004 WR 250 Owner's Manual
Husqvarna WR 250/2004 Owner's Manual
Husqvarna WR 250 2013 Owner's Manual
Husqvarna WR 125/2002 Owner's Manual
Husqvarna 2004 TE 250 Owner's Manual
Husqvarna 2009 TE 250 Owner's Manual
Husqvarna 2009 TC 250 Owner's Manual
Husqvarna 2006 TE 250 Owner's Manual
Husqvarna 125/2002 Owner's Manual
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved