Page 186 Setting Preferences for Your CommunicatorTo enter a permanent IP address:1. Tap the IP Address check box to deselect it and display a permanent IP address field belowthe check box.2. Tap the space to the left of the first period then enter the first section of the IP address.Note: Each section must be a number from 0 to 255.3. Tap and enter the remaining sections of the IP address.4. Hold Option and press Return to finish.Creating a login scriptA login script is a series of commands, similar to an autoexec.bat file, that automates logging intoyour ISP. You can create login script files by selecting commands from the Command pick list inthe Login Script dialog. Some commands from the Command pick list, such as Send, require youto supply additional information. Those commands have a parameter field so that you can add thenecessary data.Note: You can also use non-ASCII and literal characters in your login script. See Appendix Dfor more information.To create a login script:1. Tap Script.2. Tap the End pick list.3. Tap the command you want from the Command list. If the command requires additionalinformation, a field appears to the right of it for you to enter the information. The followingcommands are available:Wait For Tells your communicator to wait for specific characters from the TCP/IPserver before executing the next command.Wait ForPromptDetects a challenge-response prompt from the server and displays adynamically generated challenge value. When you enter the challenge valueinto your token card, this generates a response value for you to enter on yourcommunicator. This command takes two arguments, separated by a verticalbar (|) on the input line.Tap here
