84Chapter 4: Installing Componentswww.gateway.comReplacing the CMOS batteryIf the server clock does not keep time or the settings in the BIOS Setup utilityare not saved when you turn off the server, replace the CMOS battery with anequivalent battery.To replace the battery:1 Print the appendix for BIOS Settings in this guide.2 Open the BIOS Setup utility by following the instructions in “Opening theBIOS Setup utility” on page 88.3 Record the BIOS settings on your printout, then close the utility. For moreinformation, see “Recording your BIOS configuration” on page 35.4 Turn off your server, then follow the instructions in “Preventing staticelectricity discharge” on page 41.5 Follow the instructions in “Opening the server case” on page 42.Warning Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent typerecommended by the manufacturer. Dispose of usedbatteries following the manufacturer’s instructions.
