56Chapter 4: Installing Componentswww.gateway.com3 Pull the drive tray’s lever away from the server, then pull the tray straightout of the server.4 If you are replacing a hard drive, remove the four screws that secure thehard drive to the drive tray, then remove the drive from the tray.- OR -If you are adding a new drive, remove the bag taped to the inside of thedrive tray, then remove the screws from the bag.Caution Before you remove a failed drive, use the appropriatesoftware and utilities installed on the server to stop allactivity on the failed drive. Instructions for using thesoftware are provided by the software manufacturer.Failure to do so may destroy the data on the drive.ScrewScrewScrewScrew
