74Chapter 4: Installing Componentswww.gateway.comReplacing the SCSI backplaneTo replace the SCSI backplane:1 Follow the instructions in “Preventing static electricity discharge” onpage 45.2 Follow the instructions in “Opening the server case” on page 46.3 Remove each of the drives from the server, including any drive in the FlexBay, and make note of which bay you remove each drive from. Forinstructions, see “Replacing the CD/diskette drive in the Flex Bay” onpage 49 and “Installing a hard drive” on page 54.4 Remove the fan module. For instructions, see “Replacing the fan module”on page 64.5 Remove the cables from the backplane board, then remove thethumbscrew.
