19Mounting your server into a cabinetwww.gateway.com6 To lock the front cover, insert the key into the lock and rotate it ¼ turnclockwise. To unlock it, rotate the key ¼ turn counter-clockwise.Removing the server from a cabinetTo remove the server from a cabinet:1 Remove the front cover, if installed.2 Remove the handles, if installed.3 While supporting the front of the server, remove the four screws that securethe server rails to the front cabinet posts.4 While supporting the server, slide the server away from the cabinet untilit slides off the cabinet rails.Warning Screws are required to support the front of the server. Youmust support the server while removing the front screwsand while sliding the server off the cabinet rails.UnlockLock
