136 TroubleshootingPeripheral/Adapter problemsThe system does not recognize a SCSI deviceThe system does not recognize an expansion cardProbable cause SolutionThe device needs to beadded as new hardwareFrom the Control Panel window (Start | Settings | ControlPanel), double-click Add New Hardware. Follow theon-screen instructions for adding the device.The SCSI ID may beinvalidAssign an available SCSI ID to the device.The SCSI bus is notterminatedMake sure the last device on the SCSI bus is terminated.The device cables arenot installed correctlyOpen the server, then check all cables between the controllerand the device.Probable cause SolutionThe interrupt or I/Oaddress is set incorrectlyCheck the address configuration of the adapter card andmake sure that it does not conflict with another card in theserver.The card has not beenconfigured through thesoftwareConfigure the card with the appropriate software.The card was not installedcorrectlyMake sure the card jumpers are set correctly and reseatthe card.
