6 GPSMAP 60CSx Owner’s ManualbAsIc oPerAtIon > bAsIc oPerAtIonVertical Profiles of routesThe Profile Page can show a profile of a route whenusing DEM (US Topo 24K maps)To create a vertical profile of the route:1. Open the Routes Page from the Main Menu,select a saved route or create a new route andthen press the Menu key.2. Select Profile and press ENTER to displaythe route profile, answer the “use data” promptand press ENTER.Note: Profiles are available only if GarminMapSource U.S. Topo 24K map data is used.Using the Route Page OptionsThe Route Page shows all points stored in memory forthe route selected on the Routes Page. Press MENUto open the Route Page Options Menu.• Remove All—removes all waypoints from thesaved route.• Reverse Route—reverses the order of the routepoints in the saved route.• Profile—creates a vertical profile of the routewhen MapSource U.S. Topo 24K map data isused.• Copy Route—makes a copy of the saved routewith the same name followed by a number.• Delete Route—deletes the saved route.• Change Data Fields—select different valuesfor the two data fields at the bottom of the page.• Restore Defaults—restore route settings to thefactory default.Options MenuRoute VerticalProfile using U.S. Topo24K DEM mappingdataOptions MenuRoute VerticalProfile using U.S. Topo24K DEM mappingdata
