GPSMAP 60CSx Owner’s Manual bAsIc oPerAtIon > bAsIc oPerAtIonNavigating a RouteAfter you create a route, you can begin navigationimmediately or save it to the Saved Routes list.Routes can use existing roadways to automaticallycalculate a route to your destination. Turns onroadways are added to the Active Route Page and arepreceded by a guidance message with a graphic of theturn. If there are not enough roads at your location tocalculate a route, a message to that effect appears.To navigate a saved route:1. Press MENU twice to open the Main Menu.2. Highlight the Routes icon, and press ENTERto open the Routes Page.3. Highlight a saved route, and press ENTER toopen the Route Page.4. Highlight the Navigate button, and pressENTER.5. To stop navigating, press MENU, select StopNavigation, and press ENTER.Using the Follow Roads option on the Routing SetupPage increases the number of turns and shows anActive Route Page with a list of turns. If you selectedthe Off Road option, you can view only the list ofpoints for a route from the Active Route Page. SeeRouting Setup on page 71.To preview the turns for an active route:1. On the Routes Page, highlight a saved route,and press ENTER to open the Route Page forthe selected route.2. Highlight the Navigate button, and pressENTER to begin navigation and show the routeon the Map Page.Route on the MapPageRoute Page
