CHAPTER 9TRIP PLANNINGThe GPS 100 allows you to perform trip and fuel planning, and calculateaviation data such as vertical speed, true airspeed, and wind.These functions are accessed from Navigation Menu 1, illustrated below,which is displayed by pressing the NAV key. To select a function from thismenu, place the cursor over the desired function and press the ENT key.NAVIGATION MENU 19.1 TRIP PLANNINGWaypoint/Route Selection From Waypoint To WaypointSpeed TimeDistance BearingTRIP PLANNING PAGEThe Trip Planning Page allows you to calculate the distance, bearing, andtime requirements between any two waypoints or for any programmed route.To perform trip planning between two waypoints...• Use the CLR key to select “WPT” on line 1.• Enter the from waypoint. If you wish to use your present position,leave it blank.· Enter the to waypoint. If you wish to use your present position, leaveit blank.· The speed field will display your present speed. You may enter a9-1
