CHAPTER 6GETTING THERE FAST — GOTOThe GOTO function allows you to quickly set a course from your positionto any waypoint.GOTO WaypointVelocityDistance DirectionCDI Time/TrackCDI PAGE (GOTO MODE)To activate the GOTO function...· Press the GOTO key. The CDI Page will be displayed with the cursorover the GOTO waypoint field on line 1.· Enter the desired GOTO waypoint name. Navigation information tothe GOTO waypoint will be displayed.Alternatively, the GOTO function may be quickly activated from any page(e.g. the Nearest Waypoint Page) by placing the cursor over the desiredwaypoint name and pressing the GOTO key. The Waypoint Definition Pagewill be displayed and the GOTO function will be activated upon confirmationof this page.You may cancel the GOTO function at any time.To cancel the GOTO function...· Place the cursor over the GOTO waypoint name on the CDI Page.· Press the CLR key, the GOTO waypoint name will become blank.· Press the ENT key. The GPS 100 will navigate using route 0, ifavailable.6-1
