Garmin GPS 100 Owner's Manual

Also see for GPS 100: Installation manual

Contents

Garmin GPS 100 Owner's Manual Manual pdf 34 page image

4-10right arrow key to scroll down the list.· Place the cursor over the first waypoint name on line 1 and press theleft arrow key to scroll up the list.The Waypoint Catalog Page allows you to delete waypoints which are notused in any route and are not members of the proximity list. (NOTE: If youwish to delete a waypoint that is used in a route or is a member of the proximitylist, first remove it from the route and/or proximity list before attempting todelete the waypoint.)To delete a waypoint from memory...· Place the cursor over the desired waypoint and press the CLR key.The waypoint name will become blank.· Press the ENT key, the waypoint will be deleted from memory.The Waypoint Catalog Page also allows you to rename user waypoints.To rename a user waypoint...· Place the cursor over the desired waypoint.· Enter a unique waypoint name. If you enter a name that is alreadyused, you will be informed with the message “WPT EXISTS ____”(where the blank will be filled in with the waypoint name). Enter adifferent waypoint name if this occurs. After entering a uniquewaypoint name, the Rename Waypoint Page will be displayed asillustrated below.RENAME WAYPOINT PAGE· With the cursor over “OK?” press the ENT key. The waypoint will berenamed, the Waypoint Catalog Page will be displayed and thewaypoint list will be re-ordered alphabetically.