Garmin 3200 Application Manual

Also see for iQue 3200: Operating instructions Specifications

Contents

Garmin 3200 Application Manual Manual pdf 13 page image

1Setting Up your iQue 3200GPS Antenna in the On PositionPull the antenna out and rotateup to the On position. Be surethe antenna is parallel with thehorizon.NOTE: This antenna is designed tobest receive satellite signals when itis aligned parallel with the horizon.If the antenna is positioned verti-cally, the iQue’s ability to receivesatellites may be dramaticallyreduced.Setting up and Customizing your iQue 3200You may customize your iQue 3200 to fit your needs, such as assign-ing applications to open with certain buttons on the unit.Initializing the GPS ReceiverThe GPS Receiver must be turned on and initialized (given an op-portunity to determine its location) before you can begin using it fornavigation. When the unit initializes for the first time it may take aslong as 15 minutes. Any time you have traveled more than 600 mileswith the GPS receiver turned off, the iQue handheld must again find itslocation by re-initializing. The initialization time can be shortened byusing the map to point to the general area are currently located (see the“Establishing a New Location” section of this guide).To turn the receiver on and initialize it:1. Rotate the antenna located on the back of the iQue 3200 so it isparallel with the horizon. This is the “On” position.2. Have a clear view of the sky to receive satellite signals. Satellitesignals cannot pass through solid materials (except glass) or denseoverhead tree cover.Customizing the iQue 3200’s Units Settings1. From the Applications Launcher screen, tap the Prefs icon.2. Tap the symbol below the Preferences title to display the pick listof options. Then tap Units to display the Units customizing page.3. Select the desired units settings (such as Statute or Metric) fordistance, speed, elevation, depth, and direction as needed.Overview