Appendix A. Configuring Advanced User ParametersGFK-2224Q January 2017 253▪ Character string values are case-sensitive; as with Station Manager commands, uppercase parametervalues must be enclosed within a pair of double quotes.▪ Numeric parameters are entered in decimal or hexadecimal format; hexadecimal values must beterminated with an 'h' or 'H' character.▪ IP addressing parameters must be entered in standard dotted decimal format.▪ Comments in the file must start with a semicolon character. All characters in the same line following asemicolon are ignored.▪ Blank lines are ignored.▪ The maximum line length in the AUP file is 80 characters. Any line, including comments, that exceeds thislength will cause errors in processing.Example:The following example sets the station manager password to “system” and the IP time-to-live for point-to-pointEthernet Global Data exchanges to 4.AUP_0_1stpasswd = “system” ; set the password to “system”gucast_ttl=4 ; set the EGD unicast IP TTL to 4
