GE JKP90 Owner's Manual

Also see for JKP90: Installation instructions Brochure Technical service guide Installation instructions Dimensions and installation information

Contents

GE JKP90 Owner's Manual Manual pdf 39 page image

Before YouCall ForService...Troubleshooting tipsSave time and money! Review the charts on the followingpages first and you may not need to call for service.GEAppliances.comPossible Causes What To DoControlpanel on You forgot to press the • Press the Start pad.microwave oven Start pad.will not operate Door not securely closed. • Make sure the microwave oven door is closed.Another function was pressed. • Press file Clear/Off pad twice to cancel it and begfinagain.The Clear/Offpad was • Begfin again.pressed accidentally.Oven controls • While using Time Defrost, numbers not entered afterimproperly set. pressing the Auto Defrost pad."SENSOR ERROR" During a sensor • The microwave oven door should not be openedappearsin the function the microwave before the finle begins to coilnt down ill the display.microwave oven oven door was openeddisplay too soon.Microwave oven light Light bulb is loose • Call for service.does not work or defective.Foods overcooked or Varying density and amount • Varying density and amount sometimes require moreundercookedinthe of foods being cooked, cooking filne.microwave oven Food not turned or stirred • Turn or stir food and begfin again.as called for in the recipe.Too many dishes in the • Do not overload your microwave oven.oven at the same time.Food not thoroughly defrosted. • See the Using the microwave sensor controls secdon.Improper cookware or • See the Microwave safe cookware section of thecoverings being used. Important Safety Instructions secdon.Humidity or moisture in • Make sure tile inside of tile oven and tile outside ofthe oven will lessen the the containe_ are dry.Sensor cooldng time.Food not allowed to stand. • Some standing time is recommended for certainvegetables cooked with the Sensor Gontrols.Clock and timer A fuse in your home may be • Replace the fl_se or reset the circuit breakeLdo not work or blown or the circuit breakerdisplay goes blank tripped.Controls improperly set. • See tile Using the clock and lower oven timer sectionfor tile lower oven clock.• See file Display On/Offsection for die microwave ovendock.The clock is in theblack-out mode.• See the Special features of your lower oven controlsection for the lower oven clock.• See file Display On/Offsection for die microwave ovendock.39