GE 5467 User Manual

Also see for 25983: User guide User guide

Contents

GE 5467 User Manual Manual pdf 42 page image

4Unit beeps• Place the handset in the cradle for 0 seconds. If it still beeps, charge battery for16 hours.• Clean charging contacts on cordless handset and charge cradle with a soft clothor an eraser.• Replace the battery.Memory Dialing doesn’t work• Did you program the memory location keys correctly?• Did you follow proper dialing sequence?Unit locks up and no communication between the base and cordless handset• Unplug the AC power adaptor from the wall outlet and the back of the base.Remove the handset battery. Wait for 30 seconds and plug the power adaptorback into the base and wall outlet. Reconnect the battery and charge for 16 hours.Caller ID SolutionsNo Display• Is battery fully charged? Try replacing the battery.• Make sure that the unit is connected to a non-switched electrical outlet.Disconnect the AC power adaptor from the base and reconnect it.Caller ID Error Message• The unit displays this message if it detects anything other than valid Caller IDinformation during the silent period after the first ring. This message indicatesthe presence of noise on the line.No Caller ID• In order to receive Caller ID information, you must subscribe to the standardname/number Caller ID service from your local telephone company.Battery SolutionsIf you experience any of the following problems, even after fully recharging thebattery, you may need to replace the battery pack:• Short talk time• Poor sound quality• Limited range