GE 5467 User Manual

Also see for 25983: User guide User guide

Contents

GE 5467 User Manual Manual pdf 20 page image

0Tone/Pulse DialingNOTE: This setting may be made only with the base.1. Press the menu/flash button until 41TONE 2PULSE shows in the display. 1TONE isthe default.. Press the caller id (9 or :) button or the touch-tone pad to scroll to 1TONE or 2PULSE.3. Press mute/menu to save. You will hear a confirmation tone.Transfer ON/OFFNOTE: This setting may only be made with the handset.In order to use the call Transfer feature (applicable ONLY with additional handsets),you must have the Transfer ON/OFF set to ON through the menu of each handset.1. Press the mute/menu button until TRANSFER 4 1OFF shows in the display.. Use the CALLER ID-VOLUME (6 or 5) button or the touch-tone pad on thehandset to scroll to 2ON.3. Press mute/menu again to save. You will hear a confirmation tone.Registration (Link Cordless Handset)NOTE: If a handset become de-registered or inoperative, it may benecessary to register the cordless handset(s) again.Registration links the base to a cordless handset. Once a handset is registered itcan use the base’s phone connection. A cordless handset will not operate until it isregistered to the base. During the registration process, keep the handset near the base.1. Press the menu/flash button on the base until LINK HANDSET ? shows in thedisplay. 2 NO is the default setting.. Press the 1 number key or press the caller id (9 or :) button on the base to scrollto 1YES.3. Press menu/flash on the base to confirm handset is linked to the base. WAITINGHANDSET REGISTRATION shows in the display.4. Press the mute/menu button on the handset until LINK BASE? shows in the display.NO is the default setting.5. Press CALLER ID-VOLUME (6 or 5) button on the handset to scroll to YES.6. Press mute/menu on the handset again to confirm. You will hear a longconfirmation tone when the handset is successfully linked to the base.