GE 5467 User Manual

Also see for 25983: User guide User guide

Contents

GE 5467 User Manual Manual pdf 38 page image

38Changing the BatteryCAUTION: To reduce the risk of fire or personal injury, use onlythe Thomson Inc. approved Nickel-Cadmium (Ni-Cd ) batterymodel 5-2729 or Nickel-Metal Hydride (Ni-MH) battery model5-2522, which is compatible with this unit.1. Make sure handset is OFF (not in TALK mode) before you replace battery.. Remove the battery compartment door.3. Disconnect the battery plug from the jack inside the battery compartment andremove the battery pack from the handset.4. Insert the new battery pack and connect the cord to the jack inside the batterycompartment.5. Put the battery compartment door back on.6. Place handset in the base or handset charge cradle to charge. Allow the handsetbattery to properly charge (for 16 hours) prior to first use or when youinstall a new battery pack. If you do not properly charge the phone, batteryperformance will be compromised.Battery Safety Precautions• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,toxic materials could be released which can cause injury.• To reduce the risk of fire or personal injury, use only the Nickel-Cadmium batterylisted in the User’s Guide.• Keep batteries out of the reach of children.• Remove batteries if storing over 30 days.NOTE: The RBRC seal on the battery used in your Thomson Inc. productindicates that we are participating in a program to collect and recycle therechargeable battery (or batteries).For more information go to the RBRC web site at www.rbrc.orgor call 1-800-8-BATTERY or contact a local recycling center.