GE 5467 User Manual

Also see for 25983: User guide User guide

Contents

GE 5467 User Manual Manual pdf 28 page image

8Switching Between Speakerphone and HandsetYou can switch between speakerphone and handset after dialing a number, or anytime during a conversation.Speaker to Cordless/Corded Handset — Press TALK/CALL BACK on handset, andthen press speaker/call back on the base. Or lift the corded handset when usingspeaker phone. Speak into the cordless/corded handset.Corded/Cordless Handset to Speaker — Press speaker/call back, then hang up thehandset. Speak into the Speakerphone.Conference the External Caller with CordlessHandset and BaseThe handset or the base can enter conference directly by pressing TALK/CALL BACKbutton on the handset or speaker/call back button on the base while the other party(handset or base) is on the external line.MemoryThe cordless handset and base each have their own separate memory storage areas.Store ten 15-character names and 4-digit telephone numbers in the handset andbase memories.Storing a Name and Number in Memory1. Press the memory button on base or mem/conference button on handset.. Press the desired memory location button (0 through 9 number keys) or use thecaller id (9 or :) button on the base or the CALLER ID-VOLUME (6 or 5) buttonon the handset to scroll to the desired location. If the memory location is occupied,the stored name and number displays. If the memory location is unoccupied,EMPTY shows in the display.3. Press the memory button on the base or the mem/conference button on thehandset. The display shows ENTER NAME.