7.9 CD-ROM/CD-Read/Write/DVD (Media Player) Kit Replacement1. Remove the front cover (see section 5.1.1).2. Remove the top cover (see section 5.1.4.)3. Disconnect power and signal cables from the back of the unit.4. While facing the front of the device, remove the one mounting screw from the lowerright part of the unit, and then pull the media player out to remove it.5. To reinstall the media player drive, reverse the removal procedure.90000291 Rev 3.0 7-17TeamPoS 2000 MAINTENANCE MANUALCaution: To prevent electric shock, confirm that the AC cable is removed fromthe AC outlet anytime the covers are removed. Be sure to observe allESD precautions and power off procedures.Note: Ensure guides on left hand side of media player align above chassis guides andensure tray opens freely after installation of front door..