Menu
FE PXR4 Operation Manual
                                                                                   | |
Contents
| 
72 Operations2-1 Parameter listParameters for the PXR are classified into operation parameters, and the first block, the second block and the third blockparameters according to the frequency of use. The second and the third block parameters are used at initialization or whenthey are absolutely necessary.Operation parameterThis chapter explains how to set the SV (Setting value) and the parameters for the PXR.Parameterdisplay symbolUser’sset value ReferencepageParameter name Description Setting range andfactory default setting (*)Parametermask DSPManual modeselection Switches between Auto and Manual operationmodes.oN: Manual modeoFF: Auto mode*0: All settings are changeable both fromthe face panel and via communication.*1: All settings are unchangeable from theface panel, but changeable viacommunication.2: Only the SV is changeable from theface panel, and all settings arechangeable via communication.3: All settings are changeable from theface panel, but unchangeable viacommunication.4: All settings are unchangeable from theface panel or via communication.5: Only the SV is changeable from theface panel, but all settings are unchangeablevia communication.When the alarm type is absolute value:0 to 100%FS (*:10)When the alarm type is deviation:-100 to 100%FS (*:10)When the alarm type is absolute value:0 to 100%FS (*:10)When the alarm type is deviation:-100 to 100%FS (*:10)When the alarm type is absolute value:0 to 100%FS (*:10)When the alarm type is deviation:-100 to 100%FS (*:10)- (Unit: seconds)- (Unit: seconds)- (Unit: seconds)0: OFF (Resets the auto-tuning or doesnot use it.)*1: ON (Performs the auto-tuning in theSV standard type.)2: ON (Performs the auto-tuning inlow PV type (SV value-10%FS).)0: Keeps the alarm latch.*1: Opens up the alarm latch.oFF: Stop*rUn: StartHLd: HoldrEM: RemoteLoCL: LocaloN: Control standby(Output: OFF, Alarm: OFF)oFF: Control RUN*Upper limit valueof alarm 3Ramp-soakcontrolSets the upper limit value atwhich alarm 3 is detected.Specifies whether or not to allow the change ofparameters.Lower limit valueof alarm 3 Sets the lower limit value atwhich alarm 3 is detected.Set value ofalarm 3 Sets the value at whichalarm 3 is detected.Upper limit valueof alarm 2 Sets the upper limit value atwhich alarm 2 is detected.Lower limit valueof alarm 2Sets the lower limit value atwhich alarm 2 is detected.Set value ofalarm 2Sets the value during whichalarm 2 is detected.Upper limitvalue of alarm 1Sets the upper limit value atwhich alarm 1 is detected.Lower limitvalue of alarm 1Sets the lower limit value atwhich alarm 1 is detected.Set value ofalarm 1Sets the value at whichalarm 1 is detected.Timer 3 display Displays the remaining time of timer 3.Timer 2 display Displays the remaining time of timer 2.Timer 1 display Displays the remaining time of timer 1.Auto-tuning Used for setting the constants for , , andby auto-tuning.Alarm latchcancelCancels the alarm latch.Remote/localsettingSwitches between remote and local operations.Standby setting Switches between RUN and Standby forcontrol.is displayedwhen alarm type 1is 0 to 15, or 32 to34, and oris displayedwhen alarm type 1is 16 to 31.is displayedwhen alarm type 3 is 0to 15 or 32 to 34, andor isdisplayed when alarmtype 3 is 16 to 31.is displayedwhen alarm type 2 is 0to 15 or 32 to 34, andor isdisplayed when alarmtype 2 is 16 to 31.dP13-32dSP3-1dSP2-128dSP2-64dSP2-32dSP2-16dSP2-8dSP2-4dSP2-2dSP2-1dSP1-128dSP1-64dSP1-32dSP1-16dSP1-8dSP1-4dSP1-2dp13-8dSP1-115Parameterdisplay symbol ReferencepageParameter name Description Setting range andfactory default setting (*)Parametermask DSP2322 *22 *22 *22 *22 *22 *22 *22 *22 *2121212019181716Set temperature(Set value) Displays the set temperature (Set value). 0 to 100%FS (*: 0%FS) Mask notallowed.Measured temperature(Measurement value) Displays the currently measured temperature(Measurement value). Setting not allowed. See page 78 for the methodof turning on/off PV.14dP13-64(SV)(PV)Note: The parameters for which * is marked with the page number in Reference page are related to Remedies of “4” on page 79.Parameters of the first blockwww. .com information@itm.com1.800.561.8187 |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved