25Integral time (Setting range: 0 to 3200 seconds)[Description]• can be set automatically by the auto-tuning operation.• can also be set manually.[Setting example] Changing the integral time from 240 seconds to 600 seconds• When is set to 0, the integral operation does not start.• When is set to 0.0, this makes the setting of ineffec-tive.Press and hold theSEL key for three seconds.will be displayed on the PV display.Press the key to display .Press theSEL key once.The current setting ( ) flashes on the SV display.Press the or keys to display .Press theSEL key once. will stop flashing and will be registered for . After that, thecontroller will operate with being seconds.If you want to display the operation status, press and hold theSEL key for two seconds.Operating procedureDisplay1.2.3.4.5.6.www. .com information@itm.com1.800.561.8187
