71The ES 450 Electronic Oven Control System:.The ES 450 electronic oven control system is used tocontrol ovens on self-cleaning model ranges that havethe convection and pre-programmed features.How to program the ES 450:The oven can be programmed to: Bake, Time Bake, Broil,Convection Bake, Self-Clean, Continuous Bake,Preprogram Functions, and set for Oven Lockout.Clock:The clock may be set for 12 or 24 hour time of day op-eration. The clock has been preset at the factory for 12hour operation. When the range is first plugged in orwhen the power supply to the range has been interrupted,the timer in the display will flash and PF (power failure)will appear in the display.To set the clock:1. Press Clock . “CLO” will appear in the display.2. Example for 1:30. Press the numbers 1 3 0 toset the time of day to 1:30. “CLO” will disappearafter 4 seconds and the clock will start. Or you maypress Start. “CLO” will disappear and the clock willstart.Changing between 12 or 24 hour time of day dis-play:1. Press and hold Clock for 6 seconds and a beep willsound.2. The display will show 12:00 to indicate the 12 hourtime of day operation is active.3. Press Clean to toggle between the 12 and 24 hourtime of day display. The display will show either12:00 or 24:00.4. Press Start to accept the change or press Clear/Off to reject the change.5. Reset the correct time as described in To set theclock.Please note that if the 24 hour time of day mode waschosen, the clock will now display time from 0:00through 24:00 hours.Continuous bake or 12 hour energy saving:The oven control has a factory preset built-in 12 hourenergy saving feature that will shut off the oven if theoven control is left on for more than 11 hours and 59minutes. The oven can be programmed to override thisfeature for continuous baking.To set the control for continuous bake or 12 hourenergy saving:1. Press and hold Timer On/Off for 7 seconds, “:—”or “:12” will appear in the display and the controlwill beep once.2. Press Clean to toggle between the 12 hourenergy saving and continuous bake features.NOTE: “12” in the display indicates the control is setfor the 12 hour energy saving mode and “:---”indicates the control is set for the continuousbake feature.3. Press Start to accept the change or pressClear/Off to reject the change.StartC onvB ake B ake B roil PreheatO ven C ookTim er C lockStopTim eK itchenTim erO n/O ff O n/O ffC leanO venLigh t1472583690 C learO ffM eats C ake s B rea dsFo od C atego ries
