62Minute timer:The minute timer serves as an extra timer in the kitchenthat will beep when the set time has run out. It does notstart or stop cooking. The minute timer can be usedduring any of the other oven functions. The minute timercan be set for any amount of time from 1 minute to 11hours 59 minutes in the 12 or 24 hour modes.To set the minute timer:1. Press Timer On/Off , “0:00” and “TIMER”will flash in the display.2. Push the number pads to set the desired time inthe display. Press Start , the time will begin to countdown and “TIMER” will glow in the display.Note: If Start is not pressed the timer will return tothe time of day.3. When the set time has run out, “END” will show inthe display and beep 3 times, every 60 seconds,until Timer On/Off is pressed.To change the minute timer while it is in use:1. Press Timer On/Off 2 times and enter the newtime using the number pads. Then press Start tostart with the new time.To cancel the minute timer before the set time hasrun out:1. Press and hold Timer On/Off . The display willreturn to the time of day.Oven lockout feature:The Oven Lockout feature prevents the oven from beingaccidentally turned on. It does not disable the clock,minute timer, surface elements or oven light switch.To activate the oven lockout:1. Press and hold Lock for three seconds.2. After 3 seconds the lock icon light ( ) will comeon and “DOOR LOCKED” will flash in the display.Once the oven door is locked the “DOORLOCKED” indicator will quit flashing and remainon along with the lock icon light.To reactivate oven operation:1. Press and hold Lock for three seconds. A beepwill sound and the lock icon light ( ) will clear andthe time will be shown. The “DOOR LOCKED” willcontinue to flash until the oven door has completelyunlocked.2. The oven control may then be programmed for alloperations.Temperature display - Fahrenheit or Celcius:The oven control can be programmed to display tem-peratures in Fahrenheit or Celsius. The range has beenpreset at the factory to display in Fahrenheit.To change the temperature from °F to °C or from°C to °F:1. Identify which display your control is set for now.To tell if your range is set for Fahrenheit or Celsiuspress Broil and hold for 7 seconds. A beep willthen sound. If “F” appears in the display it is set toshow temperatures in Fahrenheit. If “C” appears inthe display it is set to show temperatures in Cel-sius.2. Press Clean to toggle between the Fahrenheit toCelsius display mode. The display will show either“F” (Fig. 4) or “C”.3. Press Start to accept the change or press ClearOff to reject the change.Silent control operation:The silent operation feature allows the control to be op-erated without sounds or beeps whenever necessary. Ifdesired the control can be programmed for silent opera-tion and later returned to operating with all the normalsounds and beeps.To change control from normal sound operation tosilent control operation:1. Identify which sound operation your control is setfor now. To tell if your range is set for normal orsilent operation press and hold Stop Time for 7seconds. “DELAY” will flash in the display. If “:SP”appears, the control will operate with normal soundsand beeps. If “:—” appears, the control is in thesilent operation mode.2. Press Clean to toggle between the normal soundoperation and silent operation mode. The displaywill show either “:SP” or “:—”.3. Press Start to accept the change or press ClearOff to reject the change.
