Craftsman G10-0R7G-2SB Manual

69F1.10 DC braking duration 0.0～50.0S【0.0S】DC braking initial frequency:Start the DC braking when running frequency reachesstartingfrequency determined.Starting frequency of DC braking is 0 and the DC braking isinvalid.Theinverter will stop in the defined DEC time.DC braking waiting time:Before the start of the outage dc braking,inverter blockadeoutput, after the delay a restart dc braking.Used to prevent the high speed start overcurrent fault caused by dc braking.DC braking current:Refers to add the amount of dc braking. The bigger braking currentis, the greater the braking torque is.DC braking duration:Refers to the amount of dc braking sustain time.Fig.6-3 DC braking diagramCode Name Setting RangeF1.11 FWD&REV dead time 0.0～3600.0S【0.0S】