Craftsman 113.228162 Owner's Manual

Contents

assembllyWARNING:OONT CONNECTPOWERCOROTOON-OFF SWITCHThe On-Off Switch has a locking feature. THIS FEATUREIS INTENDED TO PREVENT UNAUTHORIZED ANDPOSSIBLE =HAZARDOUS USE BY CHILDREN ANDOTHERS.1, Insert key into switch.NOTE: Key is made of yellow _lastic. _1;K E Y(YELtOW _AST It12. To turn Lathe ON,.. INSERT finger under switch leverand pull END of switch out.JKEY3.: To turn Lathe OFF... PUSH lever in,Never leave the Lathe unattended until it has come to acomplete stop ant you have removed the switch key.Do net cycle the motor switch on and off rapidly, asthis may cause the faceplate or sanding disc to loosen.In the event this should ever occur, stand clear of theface plate or sanding d_sc until it has come to a completestop, ,. retignten it.4. To lock switch in OFF position . . . HOLD switch INwith one hand, REMOVE key with other hand.WARNING: FOR YOUR OWN SAFETY, AL-WAYS LOCK THE SWITCH "OFF". WHENLATHE IS NOT IN USE ... REMOVE KEY ANDKEEP IT IN A SAFE PLACE . ALSO. INTHE EVENT OF A POWER FAI'LURE (ALL'OFYOUR LIGHTS GO OUT) TURN SWITCH OFF,,.LOCK IT AND REMOVE THE KEY. THiS WILLPREVENT THE LATHE FROM STARTING UPAGAIN WHEN THE POWER COMES BACK ON.Io_OLDII\\PULL